Argon, Nitrogen, Helium
We are counted amongst the foremost Supplier of Argon, Nitrogen ,Helium and Nitrous oxide Gas Cylinders. These Argon, Nitrogen ,Helium and Nitrous oxide Gas Cylinders are manufactured from the on, Nitrogen ,Helium and Nitrous oxide Gas Cylinders are non-m and Nitrous oxide Gas Cylinders are available at economic prices.
Cryogenic Vessels are designed for storage and transport of liquid gases at sub-zero temperatures. Manufacturing of such cryogenic tanks requires special technical know how and sophisticated fabrication techniques.
Acetylene gas is commonly used for gas welding because of its simplicity in production and transportation and its ability to achieve high temperature in combustion.
CRYOGENIC LIQUID CYLINDER
The distribution of cryogenic liquid cylinders over the past few decades has not changed much since their design was upgraded for durability and efficient filling practices .. However, operators must not lose sight of the regulations for the safe distribution of this convenient packaged gas product. They must understand the operation, stamping and filling requirements, as there are likely various models and manufacturers of these cylinders in their fleets.
CRYOGENIC LIQUID PUMP
The heat provided by ambient air has the significant advantage of zero cost. In the case of natural draft vaporizers there is also the benefits of zero maintenance and zero impact on the environment. In addition to natural draft vaporizers, air can be forced by fans to increase heat transfer rates and minimize required plot area.
VALVES FOR GAS CYLINDERS
Cylinder Valve is fixed into Gas Cylinder by screw threads. A Valving Capsule of suitable soft metal for fitting between male and female threads may be used to ensure gastight joint when the valve is screwed home. Alternatively a jointing compound compatible with gas contained in cylinder and valve material may also be used to ensure gas-tight joint.
PIN INDEX VALVES & YOKE
MEDICAL & INDUSTRIAL REGULATORS
Aluminium CO2 cylinders for beverage service. Clean, corrosion-resistant, lightweight.
Cooling towers are heat removal devices used to transfer process waste heat to the atmosphere. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of closed circuit dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb air temperature.